Estimate roof area and quantities for shingles, roof tiles, or metal roofing. Choose feet or meters, use pitch rise or degrees, enter optional USD or EUR costs, and download a PDF estimate.
ROOFING MATERIALS & COST CALCULATOR
Estimate Roofing Materials & Project Costs
Choose feet or meters and select asphalt shingles, roof tiles, or metal roofing. Enter horizontal roof footprints, set pitch as rise or degrees, and print, copy, or download your estimate as a PDF.
Measure safely. Do not climb onto a roof or enter a hazardous area to get measurements. Use existing plans, ground-based measurements, or information from a qualified professional.
OPTIONAL SERVICE CONNECTION
Need professional roofing assistance?
Open the Services finder with United States and Roofing already selected. Choose your location and follow the existing state/ZIP-code steps to check listed service availability. Coverage varies. QuickServiceSearch connects visitors with providers and does not endorse or guarantee any provider.
A planning estimate based on the measurements and product details entered.
Estimate summary
Roof surface area
Area including waste
Estimated material quantity
Estimate details
Roofing material
Waste allowance
Measurements and pitch
Roofing squares
Material coverage
Underlayment
Assumptions: rectangular horizontal footprints, pitch adjustment applied to each section, waste applied after surface area, and product coverage based on the values entered. Planning estimate only; not a quote.
Estimated cost
Estimated materials cost
Estimated labor cost
Total materials and labor cost
ROOFING CALCULATOR GUIDE
How to use the roofing calculator
Enter each rectangular section’s length, width, and pitch. Dimensions describe the horizontal footprint, including overhangs where applicable. Choose pitch rise per 12 inches or angle in degrees; both formats apply the same slope adjustment.
Measurement units
Pitch format
Example in feet and rise format: 40 × 30 ft (1,200 sq ft footprint), pitch 6:12 rise (26.6°).
How to calculate roof area
Multiply footprint area by √(1 + (rise ÷ 12)²), or divide by cos(pitch angle) when using degrees. For example, a 40 × 30 ft section (12.192 × 9.144 m) has a footprint of 1,200 sq ft (111.48 m²). At 6:12 rise (about 26.6°), the factor is about 1.118 and surface area is about 1,342 sq ft (124.68 m²). With 10% waste, material area is about 1,476 sq ft (137.12 m²).
What is a roofing square?
A roofing square is 100 square feet (about 9.29 m²). The example is about 13.42 squares before waste and 14.76 squares with a 10% allowance, regardless of the selected display units.
How are material quantities estimated?
Shingles use area per bundle, tiles use tiles per square meter, and metal roofing uses effective panel area after overlaps. Enter coverage from product packaging; estimated whole units round up. For metal roofing, this is a rough area-based count, not a panel layout: roof dimensions, available panel lengths, orientation, and offcuts can change the number required.
Choosing roofing material and currency
Select shingles, tiles, or metal roofing to show only the corresponding quantity input. Optional costs can be shown in USD or EUR. Enter prices in the selected currency; the calculator does not convert exchange rates.
How roof pitch and waste affect area
A steeper pitch increases roof surface area for the same footprint. Common pitches include 3:12, 4:12, 6:12, 8:12, 10:12, and 12:12. Waste accounts for material handling and cuts; the appropriate amount depends on roof and installation details.
Why estimates differ from actual material needs
This calculator models rectangular footprints. It does not precisely model hips, valleys, dormers, openings, overlaps, ridge caps, starter strips, or flashing. Confirm measurements and product compatibility with a qualified professional.
Can I estimate shingles, roof tiles, and metal roofing?
Choose a material to show its matching coverage or quantity field: coverage per bundle for shingles, tiles per square meter for tiles, and effective area per panel for metal roofing. Use manufacturer specifications for your product.
How does the pitch setting work?
Choose Rise per 12 inches or Degrees in the pitch format selector. For example, 6 inches of rise per 12 inches of horizontal run is about 26.6°. The rise input remains based on a 12-inch run even when your roof dimensions are in meters.
Can I enter roof dimensions in meters?
Yes. Choose Meters and square meters in Measurement units. Lengths, widths, and area-based coverage convert when you switch units. Tile density remains expressed as tiles per square meter.
How can I measure my roof safely?
Do not climb onto a roof or enter a hazardous area to measure it. Use existing plans, ground-based measurements, or information from a qualified professional.
How many shingle bundles do I need?
Enter the coverage printed on your shingle package. The calculator divides material area by that coverage and rounds up to a whole bundle.
What is a roofing square?
A roofing square is the conventional U.S. roofing unit of 100 square feet, or about 9.29 square meters. The calculator displays roofing squares along with the selected area units.
Does it include valleys, dormers, or ridge caps?
No. This version models separate rectangular roof footprints and does not precisely model overlaps, hips, valleys, dormers, ridge caps, starter strips, or flashing.
How accurate is the metal-panel count?
It is an area-based planning estimate only, not a panel layout or cut list. Actual quantities depend on panel lengths, orientation, roof geometry, overlaps, and offcuts. Confirm the panel layout and quantity with the manufacturer or roofing installer before ordering.
Can I enter costs in euros?
Yes. Select USD or EUR and enter prices in that currency. Switching currency changes the displayed currency format, not the numeric price values.
Does it provide local prices or a quote?
No. Cost fields use only amounts you enter. Estimates are not local contractor prices or guaranteed quotes.
FROM THE BLOG
Latest Blog Posts
Practical tips for your next project, helpful service guides, and the latest updates on Quick Service Search.
Explore four new calculators, clearer PDF estimates, Texas roofing coverage, expanded travel services and easier navigation in QuickServiceSearch Update v0.5.
Estimate drywall sheets, waste, materials and labor for one room or several. Learn to plan a project budget in US or metric units and save a PDF estimate.
Work out how much paint you need, estimate materials and labor, and save a PDF budget. A practical painting calculator guide for homes, workers and businesses.
Quick Service Search uses cookies and similar technologies to improve the website and, with your permission, understand how visitors use our site. You can accept or decline analytics cookies.